Docking Station for iPod
- Certified iPod Connector installed for iPod docking
- Recharge Circuit for iPod mini/nano/photo/video
- Controls connected iPod players
- Electronic Volume Control
- Lighted Buttons (Keys)
- Motorized iPod Docking Drawer
- Wall-Mountable (Mounting Hardware included)
- iPod Authentication IC installed
Speakers
- 2.1 Channel Speaker System
- Magnetically Shielded Full-Range Stereo Speakers
- Subwoofer built in
- Built-in Amplifier
- Digital Tune AM/FM Radio
- Direct Access Tuning
- 10 Station Memory Presets
- Digital Clock with Adjustable Timer
- LCD Display with White Backlight
Jacks
- Video Out Jack for iPod photo & video versions, RCA type
- Video Out function for iPhone in airplane model
- Line-In jack for other Audio Players, 3.5mm
- 2- Aux-In jacks for other Audio Players, 2 x RCA L&R
- Subwoofer Output Jack
- A/V Output
Remote Control
- Full-Feature Remote Control operates Unit & iPod
- Direct Access Radio Station Tuning
- Bass & Treble Level Function
- Remote Batteries included
Power
- AC: Built-In AC Cord, ETL/CETL Listed
Includes
- AM Loop & FM Wire Antennas
- Wall-Mount Hardware and Instructions
- Remote Control, Remote Batteries, included
- Patent Pending
Radio Shack
Target
JC Penny
Kohls
Amazon
Blain's Farm and Fleet
To order parts for this product, call: 1 (314) 621-2881 (option #2)
Why am I unable to change categories on my Ipod Touch with the remote of the IT188B, for example switching from music to video?
Why am I unable to control the time on my SLEEP function?
Make sure you are pressing the SLEEP button, and then the TUN FWD button to select the number of minutes you will want to delay your IT188B from powering OFF. 2. Press the SLEEP button again to set your chosen time.
How do I set the clock?
Check to see that the power is in the OFF mode. 2. Press the TIME SET/ PLAY button until the hours place of your clock starts blinking. 3. To set the hours place, scroll up or down using the TUNE REV and TUNE FWD buttons. Keep in mind the difference between a.m. and p.m. A.M. hours will not be labeled as a.m. to avoid confusion with the AM radio band. 4. Press the TIME SET/ PLAY button to select the hours place. Then, repeat this step to set the minutes place.
Why can I not control my mp3 player using my remote?
If the mp3 player you are using is not an iPod, your remote will not be able to control your mp3 player. 2. The two auxiliary inputs are only meant to distribute sound to a left and a right speaker as if they were transferring an audio signal to your headphones. 3. If you are using an iPod shuffle, you will not be able to control the playback using your remote because the shuffle model does not have the same 30-pin interface that other iPods have. 4. An iPod shuffle will need to be connected to AUX 1 or AUX 2 like any other mp3 player. 5. Connect an mp3 player to AUX 1 or AUX 2 on the back of your IT188B, using a 3.5 mm jack to stereo RCA cable. 6. Press the function button until AV1 or AV2 appears on your display. 7. If you do not hear it at first, turn up the volume on your mp3 player, and then turn up the volume on your iLive system.
How do I connect my iLive player to my television to display iPod videos?
Only on the iPod video model and the iPod photo model will you be able to use a composite video cable to connect your iPod to your television.
On the Photo iPods, go to Photos. Then, go to the Slideshow Settings. From there, scroll down and set the TV Out option to ON.Make sure that the Output Signal is set to NTSC as well. Go into your Photo Library and select the photos you wish to see on your television screen. This option is right below the TV Out option. On the Video iPods, proceed the same way as the Photo iPods to view your photographs. To view videos, go to Videos. Scroll down to and select Video Settings. From there, scroll down and set the TV Out option to ON. Make sure that the Output Signal is set to NTSC as well. You may want to turn the Widescreen option to "Off" if you do not have a widescreen television.
Why can I not connect my iPod to my iLive player?
Check to see that the iPod input dock is centered before you attempt to dock your iPod into your iLive system. This can be done by sliding the interface between your iPod and your iLive system. This gives you a choice between connecting an iPod or an iPod Nano. The nature of a first or second generation iPod Nano is that it has a 30-pin interface on its bottom which is off-center. Having an adjustable input provides a way to center both iPod and iPod Nano. It is recommended that you insert the plastic footing underneath your iPod so that you can make adjustments to your playback, while keeping the player secure. Make sure to slide the plastic footing firmly in place. The choice of which docking insert you should use depends upon the type of iPod you have. Please refer to your instruction manual for a helpful chart to tell which insert goes with which iPod. To access your instruction manual online, refer to CUSTOMER SERVICE -> DOWNLOADS and select the correct model number.
How do I receive better reception from my AM/FM tuner?
The black wire included with your system is your FM antenna. Make sure your FM antenna is firmly in the FM ANT port. The black antenna with a rounded shape is your AM antenna. Clip both parts of the antenna wire into the AM ANT port on the back of your iLive system. While in the Tuner mode, adjust the position of your antenna until you have reached optimal reception. This may take some trial and error by moving it back and forth to see which position gives you a clearer sound to your radio.
Why can I not hear any audio from my iLive docking system?
When an auxiliary line-in cord is inserted into the LINE-IN jack (on the right side of your IT188B) you will not be able to hear what is connected to IN2 (on the back of your IT188B). Both of these input share the same input function of AV2. To play audio from either of these inputs, press the FUNCTION button until AV2 appears on your LCD screen. If both inputs have connections with audio players, the LINE-IN jack will have precedence over the IN2 jack. Make sure to detach the cable connected to LINE-IN before connecting a device to IN2. You will need an auxiliary line-in cable (3.5 mm mini to stereo RCA cable) to connect an iPod shuffle to this system. Also, there is a Volume Limit option in the Settings menu of your iPod. Make sure that this maximum volume is set to a range that will be audible. Be careful when adjusting your volume level. Higher decibel levels at close range may put you at risk for hearing damage.
Why can't I display photos or videos from my Ipod Touch onto my television with this model?
If the software on your Ipod Touch is version 2.0 or higher then photos nor videos will not display on your television. The hardware was created before the software was upgraded and is not compatible with this model at this time.
Why am I unable to change categories on my Ipod Touch with the remote of the IT188B, for example switching from music to video?
Switching to different categories on the iPod Touch can not be done with the remote it can only be done by pressing the menu button directly on the Touch.
I have one of the new iPods (Nano 4th gen., iTouch 2nd gen., or the Classic 120GB). Are these compatible with this unit and what docking insert do I use?
This unit has a universal well and all these new iPods are compatible. You should use the bracket that came with your new iPod. Or, if you prefer, you can substitute the black brackets included with the unit as follows: Nano 4th gen. - # 8, iTouch 2nd gen. – # 14, and Classic 120GB – #9.